I-Fortune Laser yeFomathi Enkulu eqhubekayo (CW) Umatshini wokucoca iLaser
I-Fortune Laser yeFomathi Enkulu eqhubekayo (CW) Umatshini wokucoca iLaser
Yintoni umatshini wokuCoca iLaser ye-CW enkulu?
Umatshini wokucoca i-laser, okwabizwa ngokuba sisicoci se-laser okanye inkqubo yokucoca i-laser, wamkela amandla aphezulu oxinaniso lwe-laser beam ukwenza imithungo ecocekileyo, enzulu yokucoca kunye namazinga aphezulu okucoca. Oomatshini bokucoca ngeLaser basetyenziswa ikakhulu ukucoca iintsimbi. Abo bacoci belaser besinyithi banamandla okucoca izinto ezahlukeneyo.
Xa kuthelekiswa nokucocwa kweekhemikhali, ukucocwa kwe-laser akufuni nayiphi na i-agent yeekhemikhali kunye nokucoca ulwelo. Xa kuthelekiswa nokucoca ngoomatshini, i-laser rust remover ayinanto yokunxiba kunye nokukrazula, akukho zinto zisetyenziswayo, kunye nomonakalo omncinci kwi-substrate. Uluhlu olubanzi lwezicelo (kunye nokucocwa kwemibhobho yenyukliya). I-teknoloji ye-laser rust remover isetyenziswe kumazwe ngamazwe kuzo zonke iinkalo (ukucoca i-mold, ukucoca i-fighter coating).
| Igama lemveliso | CW ifomathi enkulu laser umatshini wokucoca |
| ukucoca uluhlu | 800mm-1200mm |
| Amandla eLaser | 1000W 1500W 2000W ngokuzithandela |
| Umthombo weLaser | Raycus MAX IPG ozikhethelayo |
| Intloko yokuwelda | SUP |
| Laser Wavelength | 1070nm |
| Pulse Ububanzi | 0.5-15ms |
| I-Pulse Frequency | ≤100Hz |
| Uluhlu lokuhlengahlengisa indawo | 0.1-3mm |
| Ukuphindaphinda ukuchaneka | ±0.01mm |
| Ubungakanani bekhabhinethi | Umgangatho / omncinci ozikhethelayo |
| Inkqubo yokupholisa | Ukupholisa Amanzi |
| I-Voltage | 220V/3-Phase/50Hz |
Idatha yobuGcisa:
| Umzekelo | FL-C1000 | FL-C1500 | FL-C2000 |
| Umthombo weLaser | IFayibha Laser | IFayibha Laser | IFayibha Laser |
| Amandla eLaser | 1000W | 1500W | 2000W |
| Intambo yeFayibha LInge | 10M | 10M | 10M |
| Ubude bamaza | 1080nm | 1080nm | 1080nm |
| Ukuphindaphinda | 50-5000 Hz | 50-5000 Hz | 50-5000 Hz |
| Intloko yokucoca | I-Axis enye | I-Axis enye | I-Axis enye |
| Isantya esicocekileyo | ≤60 M²/Iyure | ≤60 M²/Iyure | ≤70 M²/Iyure |
| Ukupholisa | Ukupholisa amanzi | Ukupholisa amanzi | Ukupholisa amanzi |
| Ubungakanani | 98*54*69cm | 98*54*69cm | 98*54*69cm |
| Ubungakanani bokupakisha | 108*58*97cm | 108*58*97cm | 108*58*97cm |
| Ukusinda okushiyekile | 120KGS | 120KGS | 120KGS |
| Ubunzima bokuqala | 140KGS | 140KGS | 140KGS |
| Ukhetho | Imanyuwali | Imanyuwali | Imanyuwali |
| Ubushushu | 10-40 ℃ | 10-40 ℃ | 10-40 ℃ |
| Amandla | <7KW | <7KW | <7KW |
| I-Voltage | Isigaba esinye se-220V, 50/60HZ | Isigaba esinye se-220V, 50/60HZ | Isigaba esinye se-220V, 50/60HZ |
Uthini umahluko phakathi kwe-laser ye-pulsed kunye ne-laser eqhubekayo?
Umthombo weFayibha laser
(Umthombo we-laser wahlulwe ube ngumthombo welaser oqhubekayo kunye nomthombo we-laser osebenzayo)
Umthombo we-laser pulsed:
ibhekisa kukukhanya kwe-pulse pf ekhutshwa ngumthombo we-laser kwimowudi yokusebenza kwe-pulsed.ngamafutshane, kufana nomsebenzi wesibane.Xa iswitshi ivaliwe kwaye yacinywa kwangoko, "i-pulse yokukhanya" ithunyelwa ngaphandle.Ngoko ke, ii-pulse zinye, kodwa amandla angoko nangoko aphezulu kakhulu kwaye ixesha lifutshane kakhulu.Kuyimfuneko ukwenza imowudi yokuthungatha ubushushu, kunye ne-laser yokunciphisa ubushushu. i-pulse ingaba mfutshane kakhulu kwaye inefuthe elihle kakhulu kwintsimi yokucoca i-laser, ayilonakalisi i-substrate ye-object.I-pulse eyodwa yamandla aphezulu, kwaye umphumo wokususa ipeyinti kunye nomhlwa ulungile.
Umthombo welaser oqhubekayo:
Umthombo we-laser uyaqhubeka nokubonelela amandla okuvelisa i-laser output ixesha elide.Ngoko ukufumana ukukhanya kwe-laser okuqhubekayo.I-laser eqhubekayo amandla aphumayo ngokuqhelekileyo aphantsi.Ukuqala kwi-1000w.Ifanelekile ukususwa kwe-laser metal rust.Into ephambili kukuba itshisa umphezulu kwaye ayikwazi ukwenza mhlophe umphezulu we-metal.Emva kokucoca isinyithi, kukho i-black oxideitment coating ine-coating ye-nonlic surface.
Ukuqukumbela, uthuli lunokususwa zizo zombini i-pulsed fiber laser kunye ne-CW fiber laser. Ukusebenzisa i-avareji efanayo amandla emveliso, ukucoca ukusebenza kakuhle kweipulsed fiber laserikhawuleza kunokusebenza kwe-CW fiber laser. Okwangoku, ukulawula ukushisa okuchanekileyo phakathi kokucoca kunye nokunyibilika kuvelisa ukusebenza kakuhle kokucoca, ngaphandle kokulimaza i-substrate.
Nangona kunjalo, ixabiso le-laser ye-CW fiber liphantsi, elihlawulela ukungonakali kokucocwa ngokufanelekileyo ngokunyusa umndilili wokukhupha amandla. Nangona kunjalo, kuya kubangela umphumo wokushisa, oya kulimaza i-substrate.
Intloko yokucoca yobuchwephesha eyenzelwe ukucoca amandla aphezulu
Uninzi lokucocwa kwelaser okuqhubekayo kwimarike:
Ukusebenzisa intloko ye-welding kunye nemisebenzi emithathu yokusika, i-welding kunye nokucoca, isetyenziselwa i-welding, kwaye uluhlu lokucoca lungaphantsi kwe-20mm. Xa usebenzisa amandla angaphezu kwe-1500w, i-lens iya kutshisa, inciphisa kakhulu ubomi be-laser kunye nentloko yokucoca. Inokumelana nemisebenzi yokucoca ixesha elide.
Isisombululo sokucoca intloko yobuchwephesha:
Intloko yokucoca i-laser yobuchwephesha, ukubonelela ngoluhlu lokucoca lwe-800mm-1200mm, inokumelana ngaphezu kwe-2000w yamandla e-laser. Kufanelekile ngokukodwa ukucoca iimeko ezinomsebenzi omkhulu kunye neqondo elikhulu lokugqwala kunye nokungcola.
Ukucoca iinkcukacha zentloko
| Ubonelelo lombane (V) | 220V ± 10% AC 50/60Hz |
| Indawo yokubeka | Flat, vibration kunye nomothuko free |
| Indawo yokusebenza (℃) | 10 ~ 40 |
| Ukufuma kwendawo yokusebenza (%)＜70 | |
| Indlela yokupholisa | Ukupholisa i-water chiller |
| Ubude beWaveleng obufanelekileyo | 1064 (±10nm) |
| Amandla e-laser afanelekileyo | ≤ 2000w |
| I-lens edibanisayo | I-D20*3.5 F50 ilensi yebhiconvex |
| Ilensi yokugxila | I-D20 F400 ilensi yeplano-convex |
| I-D20 F800 ilensi yeplano-convex | |
| Isibonisi | 20*15.2 T1.6 |
| Iimpawu zelensi ezikhuselayo | D20*2 |
| Uxinzelelo lomoya oluphezulu oluxhaswayo | 15 ibha |
| Gxininisa uluhlu lohlengahlengiso oluthe nkqo | ± 10mm |
| Uluhlu lohlengahlengiso lwamabala | Umgca 0~300mm |
| Ukusinda okushiyekile | 0.7kg |
Isicelo esiqhubekayo sokucoca
Inani lezicelo zokucoca i-laser likhula ngokukhawuleza. Yonke imihla amathuba amatsha ayafunyanwa kwaye ayaphononongwa. Ukususela ekususweni kwe-rust yeklasi ukuya ekubuyiselweni kwee-facades zokwakha zamatye endalo. Kwaye yonke into ephakathi: ukususwa kwepeyinti, i-de-coating, ukucoca i-mold, i-oil, ekhethekileyo
unyango lomphezulu kunye nokuleyibhile nokumakishwa. Usetyenziso lwemizi-mveliso yeemveliso ze-Fortune Laser zisetyenziselwa ukwahluka ukusuka kweyona ndawo incinci ingafikelelekiyo ukuya kwindawo enkulu yeziseko zoluntu okanye zabucala. Ngalo lonke ixesha inika iziphumo ezingaphezulu kobekulindelekile.
Ukucocwa kwe-laser efomathi enkulu eqhubekayo kuphucula kakhulu ukusebenza kakuhle kokucoca, kwaye ifaneleke ngakumbi ukucoca iimeko ezinomthwalo onzima. Okufana nokucocwa kwesikhongozeli, ukucocwa kwemibhobho emikhulu, ukucocwa kwezixhobo zenqwelomoya, ukucocwa kweenqanawa, njl.
I-fiber laser welding yobuchwephesha bokucoca umatshini wokusika umenzi weshishini lenkonzo yemveliso yesinyithi. I-laser welder, isicoci se-laser kunye ne-laser cutter ithengiswa eYurophu, e-Asia, eMzantsi Melika, eMntla Melika, e-Afrika, kuMzantsi-mpuma we-Asia.
I-laser welders ephathekayo kunye nezicoci ze-laser zithandwa ngakumbi. Ingaba ukhangela isixhobo sokucoca ukuze usetyenziswe, okanye uceba ukuqalisa ishishini lenkonzo yokucoca i-laser, lo matshini wokucoca ifomati Enkulu lukhetho oluhle kakhulu. Nceda uqhagamshelane nathi namhlanje ngeenkcukacha ezithe vetshe.
