Madaxa Alxanka Laser
Madaxa Alxanka Laser
●Laci karo oo dabacsan oo leh 0.88kG miisaanka saafiga ah.
●Daqadaha ilaalinta ee modulka ah ayaa ku haboon dayactirka.
●Naqshada Ergonomic ayaa la door bidayaa in lagu shaqeeyo waqti dheer.
●La jaanqaadi kara nozzles kala duwan si loo daboolo baahiyaha farsamo ee alxanka ee kala duwan.
●Biyaha qaboojinta dhammaan muraayadaha indhaha iyo daloolka si loo kordhiyo cimriga adeegga madaxa alxanka.
● Ilaalinta badbaadada awoodda leh si looga fogaado waxyeellada laysarka inta lagu jiro hawsha.
Nooca Xidhiidhiyaha: QBH
Dhererka Wobble: 1.5mm
Dhererka Mawjada: 10801 10nm
Xawaaraha Wobble:600r/daqiiqo .6000r/daqiiqo
Awoodda laser: s2KW
Jidka garaaca: coaxial
Dhererka isku dhafka: 50mm
Cadaadiska Gaaska: s1Mpa
Dhererka diiradda: F125.F150
Miisaanka saafiga ah: 0.88KG
● Muuqaalka barta laysarka la tafatirin karo.
● Biyo qaboojinta dhammaan muraayadaha indhaha iyo daloolka si loo kordhiyo cimriga adeegga madaxa alxanka.
● Awoodda laser: 2000W / 4000W
● CCD-da la isku daray iyo moduleka soo-bandhigidda waxay qaadi karaan software muuqaal ah iyo alxanka
nidaamka raadraaca tollayn.
Dhererka isku dhafka: 75mm
Dhererka diiradda: 150mm/ 200mm/ 250mm/ 300mm
Qiyaasta Sawirka: X: 0 ~ 5mm Y: 0~ 5mm
Inta jeer ee Wobble: 1500Hz
Miisaanka: 5.7KG
●Noocyo kala duwan oo lagu dabaqi karo laser fiber, laser diode toos ah iyo laser buluug ah oo ikhtiyaari ah.
●Naqshad iftiin leh iyo mid cufan.
●Labada isku dhaca iyo lenska diiradda ayaa biyo la qaboojiyey.
●CCD interface iyo laysarka aragtida tolitaanka interface waa ikhtiyaarka ballaarinta shaqada.
●Naqshadeynta qaab dhismeedka dareeraha oo hufan si loo helo ilaalinta ugu fiican barkadda dhalaalka.
●Qofka Coaxial ama mindida hawada+tubaabka garaacida dhinac waa ikhtiyaari.
Interface Fiber: QBH, QD;Qiimaynta awoodda: 2KW
Dhererka Focal ee Isku-xidhka/Lens-ka Diirada: 100mm: 150/ 200/250/300mm
CCD: TYPE-C, TYPE-CS
Aperture cad: 28mm
Dhalada Daboolka (Boostada): 27.9*4.1mm
● Wadooyin gilgilan oo kala duwan sida goobada joogtada ah, xariiq joogto ah, goobada alxanka, xariiqda alxanka, nooca C iyo nooca S.
●Labada xakamaynta gudaha iyo qaabka xakamaynta dibadda.
●CCD ama isha laysarka isha ku haysa raadraaca tollayntu waa ikhtiyaar si loo ballaariyo shaqada.
Barkadda dhalaalka oo la xoojiyey ayaa la heli karaa marka la barbardhigo alxanka caadiga ah., Si loo kordhiyo ballaca dhalaalka, la qabsiga gaaska iyo in la yareeyo cilladaha tollayn.
●Dhismaha dareeraha siman oo hufan si loo helo ilaalinta ugu fiican barkadda dhalaalka.
Interface Fiber: QBH, QD;Qiimaynta awoodda: 4KW
Dhererka Focal ee Collimator: 100mm;Aperture cad: 35mm
Dhererka Focus-ka: 250mm, 400mm
Inta jeer ee Wobble:≤1500Hz (waxay kuxirantahay dhexroorka wobble)
Dhinaca Isku-xidhka (Sare): 30*1.5mm Dhinaca Diirada Saaridda (Sida): 38*2mm
●Naqshad iftiin leh oo leh marin raaxo leh.
●Tolmo alxanka oo ballaadhan, borosity hooseeya iyo ilaalinta barkadda dhalaalka oo aad u wanaagsan.
● dhidibka kelida ah ee wareega wareega 1.7mm ama 2.0mm iyadoo la adeegsanayo FL125mm ama FL150mm.
● Nozzles alxanka kala duwan ayaa lagu daray ikhtiyaarka.
●Ilaalin badan oo badbaado leh oo leh biim otomaatig ah ayaa shaqaynaysa marka sanbadhku ka baxo qalabka shaqada.
●Nidaamka xakamaynta alxanka leysarka iyo guddiga HMI ayaa lagu daray.
●Foojiyaha silig sida ikhtiyaarka ah si loo ballaariyo xadka codsiga.
Interface Fiber: QBH
Qiimaynta awoodda: 4KW
Dhererka Focal ee Collimator: 60mm
Aperture cad: 15mm
Dhererka Focus-ka: 125mm, 150mm
Dhexroor goobaabin wareeg ah: 1.7mm/ 2.0mm
Dhinaca Diirada saarista (Sida hoose):20*3mm
●Qilin Handheld Laser Welding Head waa madax alxanka gacanta oo awood badan, kaas oo xaqiijin kara noocyo kala duwan oo wax soo saarka iftiinka sida barta, xariiqda, goobada, saddexagalka, 8-xaraf iyo wixii la mid ah.
● Fudud iyo dabacsanaan, naqshadeynta xajintu waxay la socotaa ergonomics.
● Muraayada ilaalintu way fududahay in la beddelo.
● Muraayadaha indhaha ee tayada sare leh, waxay taageeri karaan awoodda 2000W.
●Naqshadaynta nidaamka qaboojinta wanaagsan waxay si wax ku ool ah u xakameyn kartaa heerkulka shaqada ee alaabta.
●Waxqabadka xidhidhiyaha wanaagsan, kaas oo si weyn u wanaajin kara adeega
nolosha alaabta.
MAXAwoodda: 2000W
Habka Dhacdada Laser: coaxial
Dhererka Mawjadaha Laser: 1070+/-20
Cabbirka Goobta: 1.2-5.0mm (optical)
Dhererka Isku-xidhka: 50mm
Dhererka diiradda: 80mm, 150mm
Nooca Xidhiidhiyaha: QBH
Gaaska ilaalinta: argon/nitrojiin culeyska guud1.32 kg
